Tools
-
Weld Mount
Weld Mount No Slide Metal/Composite Bonder [8040]
$49.99No Slide Metal/Composite BonderRevolutionary Metal Bonder will hold heavy parts at application without sliding either on a vertical or overhead surface. AT-8040 will hold 3,500lbs in 40 minutes. No Welding, Drilling or Tapping.Weld Mount AT-8040 is a...$49.99 -
Weld Mount
Weld Mount 1.25" Tall Stainless Stud w/#10 x 24 Threads - Qty. 10 [102420]
$46.991.25" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. ...$46.99 -
CLC Work Gear
CLC L255 53 Pocket Tech Gear Lighted Backpack [L255]
$159.00$119.00L255 Tech Gear™ Lighted BackpackThe CLC Tech Gear ™ dual compartment 53 pocket LED lighted tool storage backpack features an integrated 3 level LED light that swivels, 2 straps for cordless drill/driver and battery charger, carrying handles,...$159.00$119.00 -
Weld Mount
Weld Mount Executive Adhesive & Fastener Kit w/AT-8040 Adhesive [1001003]
$296.99$271.99Executive Adhesive & Fastener Kit w/AT-8040 AdhesiveThis Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Contains 1 Tube Of Our AT-8040 No Slide Multi Bonder...$296.99$271.99 -
T-H Marine Supplies
T-H Marine Prop Master Propeller Wrench [PMW-1-DP]
$32.99Prop Master Propeller WrenchThe Prop Master™ is the original molded propeller wrench.This 1-1/16" six point socket style prop wrench is made of high tensile strength, indestructible nylon. It is totally resistant to fuel, sun, salt water, and...$32.99 -
Weld Mount
Weld Mount 2.25" Tall Stainless Stud w/#10 x 24 Threads - Qty. 10 [102436]
$66.992.25" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. ...$66.99 -
Weld Mount
Weld Mount AT-300 Adhesive Dispensing Gun f/AT-2010 & AT-4020 [80300]
$87.99Adhesive Dispensing GunThe AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges. When using AT-6030 adhesive it requires AT-12 (10 to 1 plunger). Replacement plungers are also available.$87.99 -
Weld Mount
Weld Mount AT-9 Aluminum Wire Tie Mount - Qty. 25 [809025]
$48.99Aluminum Wire TieUsed with Stainless Steel or Nylon wire ties up to 0.4 inches wide. 250 lbs tensile strength when bonded with AT-6030 adhesive manufactured of 5052 marine grade aluminum for UV and salt water resistance. Ideal alternative to welding or...$48.99 -
Attwood Marine
Attwood Prop Wrench Set - Fits 17/32" to 1-1/4" Prop Nuts [11370-7]
$27.99Prop Wrench Set - Fits 17/32" to 1-1/4" Prop NutsMultiple socket sizes for all prop maintenance.Offers multiple sockets to fit from 17/32" to 1-1/4", allowing consumers to service multiple propsBuilt of durable plasticWARNING: This product can expose...$27.99 -
Seaguard International
Seaguard Marine Digital Corrosion Standard Tester w/Silver Silver Chloride Reference Cell (SSC) [SEACORP]
$625.00$451.99Marine Digital Corrosion Professional Tester with Silver & Silver Chloride Reference Cell (SSC)The corrosion protection system on your boat should be checked at regular intervals. Failure to do so can lead to a costly and time consuming repair...$625.00$451.99 -
Weld Mount
Weld Mount .75" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15 [83212]
$37.99.75" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide range of...$37.99 -
Weld Mount
Weld Mount 1" Tall Stainless Stud w/1/4" x 20 Threads - Qty. 10 [142016]
$44.991" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4" x 20 threads. Use for hanging panels,...$44.99 -
Weld Mount
Weld Mount 1.25" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15 [83220]
$42.991.25" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide range...$42.99 -
Weld Mount
Weld Mount 1.5" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Threads - Qty. 15 [83224]
$44.991.5" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide range of...$44.99 -
Weld Mount
Weld Mount AT-113B Large Black Footman's Strap - Qty. 6 [80113B]
$30.99Footman's Strap MountThe Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide and holds up to a 1.3" max strap width. This strap is incredibly strong, paintable, and is rated for over...$30.99 -
Weld Mount
Weld Mount AT-4020 Acrylic Adhesive [4020]
$50.99Acrylic AdhesiveCAN NOT SHIP AIR,UPS GROUND ONLYAT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in vertical or overhead applications. Cures in 10 - 12 minutes and has working strength within 40 minutes...$50.99 -
Weld Mount
Weld Mount AT-5 Large White Nylon Wire Tie Mount - Qty. 50 [805950]
$44.99White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge...$44.99 -
Weld Mount
Weld Mount AT-850 Square Mixing Tip f/AT-8040 & AT850 - 4" - Case of 10 [80850]
$28.99AT-850 Square Mixing Tip f/2010, 4020, & 8040 Adhesives - 4" - Case of 10Weld Mount's AT-850 tip is for use only with the 2010, 4020, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is...$28.99 -
Weld Mount
Weld Mount AT-850 Square Mixing Tip f/AT-8040 - 4" - Case of 50 [8085050]
$89.99AT-850 Square Mixing Tip 4" - Case of 50Weld Mount's AT-850 tip is for use only with the 2010, 4010, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is separated.Features:Square Mixing Tip4"...$89.99 -
Weld Mount
Weld Mount Industrial Kit - No Adhesive [7008]
$389.99$320.99Industrial Kit - No AdhesiveThis Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For Industrial Maintenance Shops. A Wide Selection Of Weld Mount Parts Are Supplied In A Heavy "Durham" Metal Box Which Is A Standard...$389.99$320.99 -
Weld Mount
Weld Mount Mixing Tips f/Use w/AT-6030,AT-2010, & AT-4020 [80650]
$27.99Adhesive Mixing Tip For AT-6030Our AT-650 mixing tip is designed specifically for use with our AT-6030 adhesive. AT-6030 is a 10 to 1 adhesive which requires a mixing tip with more mixing chambers to insure proper mixing before use. These mixing tips...$27.99 -
Weld Mount
[88100]
$179.00$174.99Polybonder Kit with AT-880 AdhesiveKit Contains:AT-880 Polybonder Adhesive (1)Dispensing Gun (1)Mixing Tips (qty 10)AT-5W (qty 30)Plano Case$179.00$174.99 -
Weld Mount
[AT-388]
$118.99$111.99AT-388 Dispensing GunThe AT-388 Adhesive dispensing gun comes with a 10:1 plunger.For Use With 50mL Cartridges of:AT-880Note: The AT-388 will ONLY work with the AT-880 Polypropylene Adhesive Cartridge. The AT-880 is a 10:1 mix ratio with a...$118.99$111.99 -
Ancor
Ancor 6" Bent Nose Pliers - 1000V [710030]
$49.996" Bent Nose Pliers - 1000VFeatures:Insulated to 1000VIdeal for use in tight spacesChrome VanadiumLength: 6" (15.2 cm)$49.99 -
Ancor
Ancor 6" Diagonal Cutting Pliers - 1000V [710040]
$46.996" Diagonal Cutting Pliers - 1000VFeatures:Insulated to 1000VErgonomic cutter for wire or cable tiesChrome VanadiumLength: 6" (15.2 cm)$46.99 -
Ancor
Ancor 6" Long Nose Pliers - 1000V [710010]
$49.996" Long Nose Pliers - 1000VFeatures:Insulated to 1000VIdeal for use in tight spacesChrome VanadiumLength: 6" (15.2 cm)$49.99 -
Ancor
Ancor 7" Combination Pliers - 1000V [710020]
$43.997" Combination Pliers - 1000VFeatures:Insulated to 1000VCombines both gripping jaws and wire cutterChrome VanadiumLength: 7" (17.8 cm)$43.99 -
Ancor
Ancor 7-Piece Screwdriver Set w/Case [711000]
$65.997-Piece Screwdriver Set with CaseFeatures:Insulated to 1000VIncludes convenient storage/carrying caseKit Includes:(1) 1/8" x 3" Slotted(1) 7/32" x 5" Slotted(1) 1/4" x 6" Slotted(1) Test probe(1) #0 x 3" Phillips(1) #1 x 3" Phillips(1) #2 x 4" Phillips$65.99 -
Ancor
Ancor Flag Terminal Die Set 12-10 [703042]
$48.99Flag Terminal Die Set 12-10Features:Works with all Ancor ratcheting crimpers; 703010, 703015, 703030, 703035$48.99 -
Ancor
Ancor Flag Terminal Die Set 22-18/16-14 [703041]
$64.99Flag Terminal Die Set 22-18/16-14Features:Works with all Ancor ratcheting crimpers; 703010, 703015, 703030, 703035$64.99 -
Attwood Marine
Attwood Boater's Dry Storage Box [11834-1]
$32.99Boater's Storage BoxKeep your maps, electronics, and other equipment safe while on the water. Perfect for use on the boat, at the dock, at home or in the field. Our O-ring lid is water-resistant and helps to seal out moisture (not intended to be 100%...$32.99 -
CRAFTSMAN
CRAFTSMAN 12-Piece Open End Box End Ratcheting Wrench Set - Metric SAE [99901]
$82.99$78.9912-Piece Open End & Box End Ratcheting Wrench Set - Metric & SAEThis versatile wrench set can be used for various applications. The open-end wrench side allows users to ratchet nuts or bolts on or off without removing the wrench from the...$82.99$78.99 -
CRAFTSMAN
CRAFTSMAN 16-Piece Mini Ratchet Socket Set - 1/4" Drive Ratchet [99880]
$28.9916-Piece Mini Ratchet & Socket Set - 1/4" Drive RatchetThis mini ratchet and socket set is the perfect option for removing fasteners in hard-to-reach places. The tool case has a foam tray for ease of carrying and storage.Includes:(4) SAE Sockets...$28.99